SANYO DENKI GLOBAL

Certifications(ISO)

ISO9001

Ueda District Operation
ISO9001 ISO 9001 Management System Certificate [2.61MB]
Valid until 2026-12-12
Certificate Number JQA-0622
Organization SANYO DENKI CO., LTD.
Ueda District Operation
5-4 Tonoshiro, Ueda-shi, Nagano, Japan
Scope of Registration
  • THE DESIGN / DEVELOPMENT AND MANUFACTURE OF COOLING FANS FOR ELECTRONIC EQUIPMENT APPLICATIONS、AIR PURIFIER, AIRFLOW TESTER, FAN CONTROLLER.
  • THE DESIGN / DEVELOPMENT, MANUFACTURE AND SERVICING (SUPPLY OF REPAIR PARTS AND TRAINING OF SERVICE PERSONNEL FOR CUSTOMER) FOR STATIC TYPE POWER SUPPLY (UNINTERRUPTIBLE POWER SUPPLY, FREQUENCY CONVERSION EQUIPMENT, POWER CONVERSION EQUIPMENT, POWER MANAGEMENT EQUIPMENT, POWER DISTRIBUTION PANELS, TRANSFORMER PANELS, PV INVERTER, ETC.) AND ROTATING TYPE POWER SUPPLY (NON-UTILITY POWER GENERATION SYSTEM, GENERATOR, ELECTRIC MOTOR, CONTROL PANELS, VENTILATION FAN, VOLTAGE REGULATING EQUIPMENT, ETC.) ANS LITHIUM-ION BATTERY PACK.
  • THE DESIGN / DEVELOPMENT, MANUFACTURE AND SERVICING OF AC SERVO MOTOR / AMPLIFIERS, DC SERVO MOTOR / AMPLIFIERS, STEPPING MOTOR / DRIVERS AND CONTROLLER ENCODER (SERVICING ARE REPAIRS AND OVERHAUL).
Associated Organization

KANGAWA WORKS
5-4 TONOSHIRO, UEDA-SHI, NAGANO, JAPAN
[THE MANUFACTURE OF AC SERVO MOTOR, DC SERVO MOTOR, STEPPING MOTOR AND ENCODER].

FUJIYAMA WORKS
4016 FUJIYAMA, UEDA-SHI, NAGANO, JAPAN
[THE MANUFACTURE OF COOLING FAN FOR ELECTRIC EQUIPMENT, AIR PURIFIER, AIRFLOW TESTER, FAN CONTROLLER, STATIC TYPE POWER SUPPLY, ROTATING TYPE OF POWER SUPPLY, PV INVERTTER, LITHIUM-ION BATTERY PACK, AC / DC SERVO AMPLIFIERS, STEPPING DRIVERS、CONTROLLER AND SERVICING (SUPPLY OF REPAIR PARTS AND TRAINING OF SERVICE PERSONNEL FOR CUSTOMER)].

TECHNOLOGY CENTER
812-3 SHIMONOGOU, UEDA-SHI, NAGANO, JAPAN
[THE DESIGN / DEVELOPMENT].

SHIODA WORKS
517 GOKA, UEDA-SHI, NAGANO, JAPAN
[THE MANUFACTURE OF STEPPING MOTOR].

TSUIJI WORKS
827 TSUIJI, UEDA-SHI, NAGANO, JAPAN
[SERVICING OF AC SERVO MOTOR / AMPLIFIERS, DC SERVO MOTOR / AMPLIFIERS, STEPPING MOTOR / DRIVERS AND ENCODER (SERVICING ARE REPAIRS AND OVERHAUL)].

Registration Date September 30, 1994
Standard ISO 9001:2015 / JIS Q 9001:2015
Certification Body JAPAN QUALITY ASSURANCE ORGANIZATION
SANYO DENKI PHILIPPINES, INC.
ISO9001 ISO 9001 CERTIFICATE [194KB]
Valid until 2025-08-02
Standard ISO 9001:2015
Certificate Holder Sanyo Denki Philippines, Inc.
Block F-1 Subic Techno Park, Argonaut Highway, Boton Area, Subic Bay Freeport Zone, Philippines, 2222
Scope Manufacturing and assembly of Cooling Fans, Static Type Power Supply (Uninterruptible Power Supply, Frequency Conversion Equipment, Power Conversion Equipment and Power Management Equipment), Stepping Motors, AC Servo Motors, Servo Amplifier, and other related products.
Proof has been furnished by means of an audit that the requirements of ISO 9001:2015 are met.
Certificate Registr. No. 01 100 1533330
First certification 2004
Certification Body at TÜV Rheinland Cert GmbH
SANYO DENKI AMERICA, INC.
ISO 9001 CERTIFICATE [143KB]
Valid until 2027-05-24
Standard ISO 9001:2015
Certificate Holder Sanyo Denki America, Inc.
468 Amapola Ave. Torrance, CA 90501 United States of America
Scope The distribution of Cooling fans, UPS and Servo products. The design and assembly of Cooling fans, Servo Systems, UPS systems and wiring harnesses.
Through an audit, documented in a report, it was verified that the management system fulfills the requirements of the following standard: ISO 9001 : 2015
Certificate Registr. No. 10001470 QM15
First certification 2000
Certification Body at DQS Inc.

ISO 14001

Headquarters
ISO14001 ISO 14001 Management System Certificate [626KB]
Valid until 2027-3-27
Certificate Number JQA-EM0610
Organization SANYO DENKI CO.,LTD Headquarters
3-33-1 Minami-Otsuka, Toshima-ku, Tokyo, Japan
Scope of Registration DESIGN / DEVELOPMENT AND MANUFACTURE OF COOLING FANS, UPS, POWER CONDITIONER FOR PHOTOVOLTAIC GENERATION SYSTEM, ENGINE GENERATOR, SERVO SYSTEMS, STEPPING SYSTEMS, CONTROLLER, ENCODER AND DRIVING DEVICE
Associated Organization

KANGAWA WORKS
5-4 TONOSHIRO, UEDA-SHI, NAGANO, JAPAN
[MANUFACTURE OF SERVO SYSTEMS, STEPPING SYSTEMS AND ENCODER]

SHIODA WORKS
517 GOKA, UEDA-SHI, NAGANO,JAPAN
[MANUFACTURE OF STEPPING SYSTEMS]

FUJIYAMA WORKS
4016 FUJIYAMA, UEDA-SHI, NAGANO, JAPAN
[MANUFACTURE OF SERVO SYSTEMS, COOLING FANS, UPS, POWER CONDITIONER FOR PHOTOVOLTAIC GENERATION SYSTEM, ENGINE GENERATOR AND DRIVING DEVICE]

TECHNOLOGY CENTER
812-3 SHIMONOGOU, UEDA-SHI, NAGANO, JAPAN
[DESIGN / DEVELOPMENT OF SERVO SYSTEMS, STEPPING SYSTEMS, ENCODER, COOLING FANS, UPS, POWER CONDITIONER FOR PHOTOVOLTAIC GENERATION SYSTEM, ENGINE GENERATOR AND DRIVING DEVICE]

Registration Date November 26,1999
Standard ISO 14001:2015 / JIS Q 14001:2015
Certification Body JAPAN QUALITY ASSURANCE ORGANIZATION
SANYO DENKI PHILIPPINES, INC.
ISO14001 ISO 14001 CERTIFICATE [211KB]
valid until 2024-11-17
Standard ISO 14001:2015
Certificate Holder SANYO DENKI PHILIPPINES, INC.
Blk. F-1 Subic Techno Park, Argonaut Highway, Boton Area, SBFZ, 2222 Philippines
Scope Manufacturing and Assembly of Fan Motors, Static Type Power Supply (Uninterruptible Power Supply, Frequency Conversion Equipment, Power Conversion Equipment and Power Management Equipment), Stepping Motors, AC Servo Motors, Servo Amplifier, and other related products.

Proof has been furnished by means of an audit that the requirements of ISO 14001:2015 are met.
Certificate Registr. No. No.01 104 1533330
First certification 2015
Certification Body at TÜV Rheinland Cert GmbH

ISO 45001

SANYO DENKI PHILIPPINES, INC.
ISO 45001 CERTIFICATE [97KB]
Valid until 2027-01-19
Management system as per ISO 45001:2018
Certificate Holder Sanyo Denki Philippines, Inc.
Block. F-1 Subic Techno Park, Argonaut Highway, Boton Area, Sublic Bay Freeport Zone, Philippines 2222
Scope Manufacturing and assembly of Cooling Fans, Static Type Power Supply (Uninterruptible Power Supply, Frequency Conversion Equipment, Power Conversion Equipment and Power Management Equipment), Stepping Motors, AC Servo Motors, Servo Amplifier, and other related products.
Proof has been furnished by means of an audit that the requirements of ISO 45001:2008 are met.
Certificate Registr. No. 01 213 1533330
First certification 2015
Certification Body at TÜV Rheinland Cert GmbH